Product Benefits
Yacht Thruster™ is a German quality/Swiss precision designed, engineered and tested system manufactured to provide durability and performance with almost triple the operating time of a comparative electric boat thruster system. 25 minutes an hour, plus a 3-year warranty. Yacht Thruster™ requires no maintenance other than bottom paint and the motor is completely sealed.
Easy Installation
Requires drilling of only three small holes to assemble, which are sealed tightly with a special rubber sealant. No fiberglass work is necessary.
Minimal Noise
About 80 % noise reduction is obtained by the external placement of the engine. this also results the elimination of possible border cavitations.
Long Runtime
The external placement of the unit gives a more efficient water cooling and allows much longer duration per cycle of the unit than with traditional bow and stern thrusters.
Space Saving
The complete drive unit is very compact and placed externally, saving valuable boat space. Only the operating and control elements, as well as the power supply remain inside the boat.
Optimal Efficiency
Optimal efficiency results from a shorter transverse channel and ideal leverage which is created by deeper and more distant positioning away from the pivot point. Typically giving up to 40 % higher efficiency than with conventional systems.
Optimal Design
Hydrodynamic shape, very short flow-channel and ideal placement reduce the water resistance to a fraction compared to conventional systems. There is no perceptible loss of speed.
Simple and Quick Installation
Virtually No Resistance In The Water!
Tank testing proves that water resistance under power is less than .09% (nine hundredths) power loss, under sail is .05% (five hundredths) loss under sail compared to a tunnel thruster at 10% sail handicap, and equivalent to the drag of only a folding propeller.
Utilizes approximately ½ the amperage of an equivalent LBS thrust tunnel thruster and Minimizes battery consumption Yacht Thruster™ Nominal current.
Specifications - Duplex Thruster Models
Model 600D | Specs |
---|---|
Power (KW) | 6.0 |
Thrust Equivalent (lbf) | 397 |
Voltage (V) | 24 |
Nominal Current (A) | 397 |
Length | 38.5 in |
Diameter | 6.5" x 6.5" |
Weight | 77.1 lbs |
Propeller (type) | 2 x B010903003-C |
Recommended Boat Size (Bow) | 56ft - 66ft |
Recommended Boat Size (Stern) | 52ft - 60ft |
I-BOX
The system control center
- Provides delay between drive directions.
- Monitors solenoid functions to reduce the chance of solenoid lock-in.
- Will stop the thruster in case of a locked-in solenoid, without extra user action and even without controlling the main switch.
- Uses the same components as the other Side-Power series and can be combined with any other Side-Power thruster.
Adaptor Installation
Installation of an external Yacht Thruster™ is quick and easy. Simply drill a 50 mm diameter hole through the hull for the S/S through-hull fitting (attached to the thruster) which also feeds the required wiring. This through-hull fitting is supplied with a watertight seal which eliminates the need of additional fiberglass work. Also supplied as part of the installation kit are S/S rods to be bolted through two 18 mm pre-drilled holes. This also includes watertight seals and provides ultimate security and rigidity of your external yacht thruster™ installation.
Mounting Bolts (Boat Interior)
The front mounting bolts are also secured from the vessels interior and provide a watertight seal.
Special Watertight Sealing
The unique seals provide a permanent watertight solution.